The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation. KEY FEATURES - Dot Fluid Calipers will have Bore Caps with a D etched. - Mineral Oil Caliper will have Bore Caps with an M etched. - Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount - Calipers designed to fit 140, 160 & 180mm rotors - Slimline 4 piston lightweight design - Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub - Available in Black, Silver, Bronze, Red, Blue, Purple and Orange - Top entry pad fitting - CNC machined from 2014 T6 aluminium ***Please note*** Shimano and SRAM brands belong to a third party and have no relation with Hope Technology RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems (Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo) Shimano Compatible Calipers (RX4+) Dura Ace Di2 R9270 / R9170 / R9120 / R9200 Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 / 105 Di2 R7170 / R7020 / Di2 R785 / RS685 / GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2 Campagnolo Compatible Calipers (RX4+) Ekar / Super Record / Record / Campagnolo H11 SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid) Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS / Sram Rival / Sram Apex / Sram S900

Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange

Brake pads include spring clip and pin Brake pads are dyno tested in-house in Barnoldswick Available for all our current brakes and older models All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- Shimano G-Type disc brake pads, without fins, for one caliper - Titanium backplate for improved heat dissipation & lighter weight - Metallic compound for increased power & durability - Compatible with 2-piston XTR brakes from 10 and 11 speed groups as well as 10 to 12 speed XT and SLX - Includes spring and pin

- Pair of H-type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020 - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Includes spring and split pin

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Hope Brake Lever Parts

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Brass compression olive for Hope hydraulic disc brakes.

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

Disc Brake Adapters

Brass hose insert for Hope hydraulic disc brakes.

- 40mm long brake blocks with hardware to fit basic caliper brakes

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- 50mm long molded brake blocks with hardware to fit most road calipers

Odyssey A Brake shoes for all your braking needs.

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

• Compatible with most side pull and center pull brakes • All weather compound

- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

-Single compound cartridge road brake pad inserts

- 72mm long molded brake blocks with hardware to fit most linear brakes