Notch is Salsa's high-torque electric mountain bike. In 160 mm-travel mode, It’s a balanced platform built for roaming far on rowdy terrain. With geometry poised for stability at speed, a powerful Bosch Performance Line CX motor, efficient Split Pivot suspension, and on-bike storage, Notch is happiest when it’s putting in extra laps, exploring new trail systems, or battling between the tape in an enduro event. - 6061-T6 alloy frame with high-modulus carbon fiber control link - Split Pivot suspension design with 160 mm of efficient travel - Split Pivot+ frame design allows riders to swap between travel classes - Bosch Performance Line CX class 1 mid-drive motor with smart system (20 mph/32 kph max assist) - 85 Nm max torque - 500 Wh Bosch PowerTube battery fully enclosed in downtube? - Compatible with 250 Wh Bosch PowerPack range-extender battery ?(sold separately) - 29 x 2.6” tire clearance - Tool and tube mount on underside of top tube - All sizes fit one bottle or Bosch PowerPack range-extender battery - Frame protection in high-wear areas (downtube, main pivot, seatstay, and chainstay)

Notch is Salsa's high-torque electric mountain bike. In 160 mm-travel mode, It’s a balanced platform built for roaming far on rowdy terrain. With geometry poised for stability at speed, a powerful Bosch Performance Line CX motor, efficient Split Pivot suspension, and on-bike storage, Notch is happiest when it’s putting in extra laps, exploring new trail systems, or battling between the tape in an enduro event. - 6061-T6 alloy frame with high-modulus carbon fiber control link - Split Pivot suspension design with 160 mm of efficient travel - Split Pivot+ frame design allows riders to swap between travel classes - Bosch Performance Line CX class 1 mid-drive motor with smart system (20 mph/32 kph max assist) - 85 Nm max torque - 500 Wh Bosch PowerTube battery fully enclosed in downtube? - Compatible with 250 Wh Bosch PowerPack range-extender battery ?(sold separately) - 29 x 2.6” tire clearance - Tool and tube mount on underside of top tube - All sizes fit one bottle or Bosch PowerPack range-extender battery - Frame protection in high-wear areas (downtube, main pivot, seatstay, and chainstay)

THE SPIRITED POWER OF EMBOLDEN E+ PRO ENTICES YOU TO SAY YES AT EVERY TURN, TAKING YOU FARTHER AND FASTER THAN BEFORE. Capable and Fun The high-performing Embolden E+ Pro provides an exhilarating ride. It has a maximum range of 290km (that's 110-150km more than other bikes in the Embolden E+ range), loads of travel (140mm front, 125mm rear), and a powerful motor (85Nm of torque). Epic mountain biking, trekking, and touring adventures are now well within your capabilities. Versatile for Multi-Usage The Embolden E+ Pro is your new secret weapon. With its 140mm front/125mm rear suspension, integrated kickstand, fender mounts, and carrier compatibility, this E-bike is ready to tackle challenging technical trails and tick off your bucket list of touring and trekking adventures. Premium, Integrated Design This E-bike brings head-turning wow factor to the trails thanks to its internally routed cables, smooth and simple frame lines, and attractive color and graphics. Additionally, the lower standover height makes it easy to get on and off. RANGE How far can I expect to ride on a single battery charge? The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tire pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery. The bar below gives an approximate range. Conditions are categorized as extreme, good, and ideal. Extreme conditions typically occur when riding with a heavy load, strong headwinds or excessive climbs. ENERGYPAK 800 / SYNCDRIVE PRO Range: - Extreme: 43 miles - Good: 86 miles - Ideal: 155 miles TECHS & FEATURES ALUXX SL ALUMINUM TECHNOLOGY This High-Performance level, state-of-the-art aluminum material is made predominantly from 6011 alloy and delivers best-in-class strength-to-weight ratios. These framesets also feature unique welding technologies for a high-performance ride quality. FLEXPOINT SUSPENSION TECHNOLOGY A proven "single-pivot" design that uses the flexing action of the chainstay/seatstay junction to produce a lightweight and durable suspension system with 4.7 inches/120mm of rear travel. HYBRID CYCLING TECHNOLOGY Hybrid Cycling Technology is a system that combines electric power with human power to produce the most efficient, powerful and natural E-bike riding experience. It's a seamless extension of a rider's own power that sets Liv and Giant E-bikes apart from other "electric" bicycles. The system consists of four key innovative technologies that work in unison with your own body's power output—a seamless extension of your own capabilities. ENERGYPAK EnergyPak side release design makes it easy to handle and remove the battery from the E-bike, plus the battery can be charged on or off the bike for convenience. SYNCDRIVE PRO The powerful SyncDrive Pro 2 Motor was co-developed with Yamaha and is their lightest ever E-bike motor. It provides 85Nm of torque, the most in the Amiti E+ range, and will help you confidently conquer the steepest of hills. The Smart Assist mode uses six sensors to optimize your power support automatically. It provides seamless acceleration and a power boost exactly when you need it. With this powerful yet quiet motor underneath you, you'll feel naturally strong in any riding situation and at any speed. SMART ASSIST With Smart Assist you can enjoy seamless acceleration and power boost. The Smart Assist Technology system replicates a natural riding style, using the six sensors to add assistance exactly when needed. RIDECONTROL DASH This compact 2-in-1 control unit has everything you need at your fingertips. Glance down at the color display to check all your riding data, such as battery status, speed, distance, time, and cadence. Pair it with the RideControl App and you can opt to get phone notifications. Keep your electronic devices charged using the convenient USB port. Need to get off and walk a little? We've got you. Simply tap Walk Assist and easily push your bike uphill or over rough terrain.

NEXT-LEVEL PERFORMANCE AND UNFORGETTABLE FUN AWAIT YOU ON THIS PREMIUM E-MTB. THE CUTTING-EDGE INTRIGUE X ADVANCED E+ ELITE IS REMARKABLY LIGHT BUT SUPER POWERFUL. GET READY TO FEEL LIKE A PRO AS YOU SHRED TECHNICAL TERRAIN WITH CONFIDENCE, ACCELERATE UP CLIMBS, AND CORNER AT TOP SPEED. KEY PERFORMANCE FACTORS Lightweight and nimble This full-suspension E-MTB, with its short chainstay and 140mm (rear)/150mm (front) travel, is engineered to create an ultra-light, efficient and responsive ride. Exceptional shock absorption is an added bonus on rock gardens. Powerful and smooth A powerful 85Nm of torque delivered by the lightweight SyncDrive Pro 2 motor is smooth and instant, keeping you efficient and in control at all times. The ultra-slim, 400Wh battery hidden in the down tube minimizes weight and provides a perfect balance of efficiency and range. Sleek design From the integrated control unit to the sleek console on the top tube and the internal cable routing, every design element embodies a high-end, modern look. It combines leading-edge E-MTB design with a user-friendly experience. RANGE How far can I expect to ride on a single battery charge? The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tire pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery. The bar below gives an approximate range. Conditions are categorized as extreme, good and ideal. Extreme conditions typically occur when riding with a heavy load, strong headwinds or excessive climbs. ENERGYPAK 400 / SYNCDRIVE PRO Range: - Extreme: 24 miles - Good: 43 miles - Ideal: 80 miles TECHS & FEATURES: ADVANCED COMPOSITE TECHNOLOGY Liv’s High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv’s Advanced-Grade Composite frames are designed to offer light weight and stiffness with optimal compliance. HYBRID CYCLING TECHNOLOGY Hybrid Cycling Technology is a system that combines electric power with human power to produce the most efficient, powerful and natural E-bike riding experience. It’s a seamless extension of a rider’s own power that sets Liv and Giant E-bikes apart from other "electric" bicycles. The system consists of four key innovative technologies that work in unison with your own body’s power output—a seamless extension of your own capabilities. ENERGYPAK EnergyPak side release design makes it easy to handle and remove the battery from the E-bike, plus the battery can be charged on or off the bike for convenience. SYNCDRIVE PRO The powerful SyncDrive Pro 2 Motor was co-developed with Yamaha and is their lightest ever E-bike motor. It provides 85Nm of torque, the most in the Amiti E+ range, and will help you confidently conquer the steepest of hills. The Smart Assist mode uses six sensors to optimize your power support automatically. It provides seamless acceleration and a power boost exactly when you need it. With this powerful yet quiet motor underneath you, you’ll feel naturally strong in any riding situation and at any speed. SMART ASSIST With Smart Assist you can enjoy seamless acceleration and power boost. The Smart Assist Technology system replicates a natural riding style, using the six sensors to add assistance exactly when needed. RIDECONTROL GO Available on premium Liv E-Bikes, RideControl Go features a multipurpose button integrated into the top tube. Colored LEDs allow you to switch power modes from the top tube and keep a clean handlebar setup. The lights also display battery level and support mode.

NEXT-LEVEL PERFORMANCE AND UNFORGETTABLE FUN AWAIT YOU ON THIS PREMIUM E-MTB. THE CUTTING-EDGE INTRIGUE X ADVANCED E+ ELITE IS REMARKABLY LIGHT YET SUPER POWERFUL. GET READY TO FEEL LIKE A PRO AS YOU SHRED TECHNICAL TERRAIN WITH CONFIDENCE, ACCELERATE UP CLIMBS, AND CORNER AT TOP SPEED. KEY PERFORMANCE FACTORS Lightweight and nimble This full-suspension E-MTB, with its short chainstay and 140mm (rear)/150mm (front) travel, is engineered to create an ultra-light, efficient, and responsive ride. Exceptional shock absorption is an added bonus on rock gardens. Powerful and smooth A powerful 85Nm of torque delivered by the lightweight SyncDrive Pro 2 motor is smooth and instant, keeping you efficient and in control at all times. The ultra-slim, 400Wh battery hidden in the down tube minimizes weight and provides a perfect balance of efficiency and range. Sleek design From the integrated control unit to the sleek console on the top tube and the internal cable routing, every design element embodies a high-end, modern look. It combines leading-edge E-MTB design with a user-friendly experience. TECHS & FEATURES ADVANCED COMPOSITE TECHNOLOGY Liv's High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv's Advanced-Grade Composite frames are designed to offer light weight and stiffness with optimal compliance. ENERGYPAK Breeze through any ride with a state-of-the-art Liv EnergyPak battery. Our innovations include EnergyPak Smart series, EnergyPak series, and the EnergyPak Plus spare battery to pack along. Safety and efficiency remain our priority to keep you riding safely for long adventures. HYBRID CYCLING TECHNOLOGY Hybrid Cycling Technology is a system that combines electric power with human power to produce the most efficient, powerful and natural E-bike riding experience. It's a seamless extension of a rider's own power that sets Liv and Giant E-bikes apart from other "electric" bicycles. The system consists of four key innovative technologies that work in unison with your own body's power output—a seamless extension of your own capabilities. RIDECONTROL GO This console features two rows of lights and a power button and is integrated into the top tube to display mode and battery level at a glance. It functions on its own as a minimalist control panel or it can work in tandem with the RideControl Ergo 3, providing an additional way of selecting your support mode. SMART ASSIST Liv's Smart Assist Technology is optimized to offer the best possible riding experience for every rider. It's used in our SyncDrive Pro, SyncDrive Sport, SyncDrive Core, and SyncDrive Move series motors. The Smart Assist is the pinnacle of smart support systems. By using information from multiple sensors, both rider input and terrain feedback are used to provide flawless, automatic support adjustment for the optimal amount of assistance. This ensures that the system provides ample power when you need it, while conserving power when you don't need as much. This results in an extremely smooth, powerful, and reliable riding experience. Translating six measurements about your riding, this adds the perfect amount of power at just the right time. The result is an extremely fluid riding experience that feels like riding a standard bike but with so much more "oomph." SYNCDRIVE PRO MG This updated motor features a magnesium casing that reduces weight to just 2.5kg while still delivering 85Nm of torque and retaining the instant engagement that characterizes SyncDrive Pro motors. It's also engineered for a reduced noise level and quiet performance. The motor shape and dimensions allow for a narrow Q factor to ensure a natural pedaling position with minimal strain on the knees.

MORE THAN JUST A WAY TO GET AROUND—THE TEMPT E+ IS FREEDOM, FUN AND JOY. KEY PERFORMANCE FACTORS Accessible and Reliable The ultra-reliable EnergyPak 500Whr has an average range of 120 km with a potential to reach up to 180 km, while the EnergyPak 400Whr has an average range of 100 km and can reach 150 km*, helping you ride further to access to new trails and experiences. *Actual range depends on several factors including weight, elevation, terrain and acceleration. Integrated Design The easy-to-access EnergyPak side-release battery is beautifully integrated into a lightweight and durable ALUXX-Grade aluminum frame, designed and tuned for women using Liv’s women first philosophy. Smooth Riding SyncDrive Core motor with 50Nm torque creates a natural yet powerful ride feel.

Every trail, every steep climb, every thrilling descent. Nothing is out of bounds with the Reign E+. Tested and developed by Giant’s E-bike enduro pros, this proven trail ripper gives you the power to enjoy the best parts of the ride again and again. KEY PERFORMANCE FACTORS Trail technology Proven Maestro rear suspension (160mm) and a powerful but compact SyncDrive Pro motor boost your capabilities on steep climbs and rugged descents. Progressive geometry with a shorter rear end and longer reach allow superior handling and agility on technical terrain. Total control RideControl Ergo 3 offers integrated, user-friendly button controls that are easy to use. The Giant E-bike App gives you tuning options and E-bike specific fitness tracking. Long-lasting power Climb steep mountains and enjoy ripping descents all day long with the new downtube-integrated EnergyPak battery system featuring 800Wh of capacit

EVERY TRAIL, EVERY STEEP CLIMB, EVERY THRILLING DESCENT. TESTED AND DEVELOPED BY GIANT’S E-BIKE ENDURO PROS, THIS UPDATED TRAIL RIPPER GIVES YOU THE POWER TO ENJOY THE BEST PARTS OF THE RIDE AGAIN AND AGAIN. KEY PERFORMANCE FACTORS Trail technology Proven Maestro rear suspension (160mm) and a powerful but compact SyncDrive Pro motor technology boost your capabilities on steep climbs and rugged descents. Total control RideControl Ergo 3 offers integrated, user-friendly button controls that are easy to use. The Giant E-bike App gives you tuning options and E-bike specific fitness tracking. Long-lasting power Climb steep mountains and enjoy fun descents all day long with the downtube-integrated EnergyPak RANGE How far can I expect to ride on a single battery charge? The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tire pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery.

Whether you’re riding trails, exploring dirt roads, or putting some zip in your daily commute, riding an E-bike doesn’t have to be complicated. The all-new Talon E+ range lets you do it all, combining the exhilarating sensation of pedal-assist power with light and agile off-road handling. And its integrated system makes it all so seamless, so simple to use, you can forget about the technology and just enjoy the ride. This frame is paired with a SyncDrive Sport 2 motor and removable EnergyPak 430 battery that’s neatly integrated into a slim down tube to help minimize weight. The updated design allows space for two water bottles or a battery range extender for longer rides. A 100mm suspension fork helps smooth out bumpy terrain, while confident off-road geometry gives it a stable ride quality. A new RideControl Dash 2 handlebar-mounted controller makes it easy to power on the bike and adjust support levels while you ride. You can also use the RideControl App to custom-tune the motor output and optimize range capabilities. The frameset is crafted with lightweight aluminum shaped with sleek lines and modern styling. It weighs just 21.7kg (size medium)—significantly lighter than most other bikes in its category. How far can I expect to ride on a single battery charge? The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tire pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery. The bar below gives an approximate range. Conditions are categorized as extreme, good and ideal. Extreme conditions typically occur when riding with a heavy load, strong headwinds or excessive climbs. Featuring an all-new lightweight aluminum frame that blends modern hardtail design with our latest E-bike technologies, the new Talon E+ delivers confidence and fun on off-road terrain. A lower top tube offers greater stand-over height, and a 100mm suspension fork soaks up bumps, giving you smooth control on trails or bumpy bike paths. The SyncDrive Sport 2 motor helps you conquer climbs, and the removable EnergyPak 430 battery is integrated into a slim down tube. Updated controls include a handlebar-mounted RideControl Dash 2 to power on the bike and adjust support levels. The frame is compatible with a dropper seatpost and features integrated mounts for a rear carrier, fenders, a kickstand and two water bottle cages, giving you the option to add an EnergyPak Plus range extender.

Accelerate up climbs, float through rock gardens, and experience more power, agility, and control with this lightweight, full-suspension e-MTB. The ultra-slim battery minimizes weight so you can ride technical trails the way you always dreamed of. KEY PERFORMANCE FACTORS - Lighter weight EnergyPak 400 battery system is ultra slim, delivering all the power you need, but in a smaller package that’s cleanly integrated into the lightweight composite frameset. - Advanced cockpit control RideControl Ergo 3 remote attaches to the composite Giant Contact SLR integrated handlebar. The control can be mounted to either side of the handlebar so you can customize your controls for a clean, uncluttered cockpit. - More power New SyncDrive Pro Magnesium motor features a magnesium casing that reduces weight by 50g. It weighs just 2.5kg and delivers 85Nm of torque while retaining the instant engagement that characterizes SyncDrive Pro motors. It’s also engineered for a reduced noise level and quiet performance. TECHS AND FEATURES - ADVANCED FORGED COMPOSITE TECHNOLOGY A state-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links. - ADVANCED COMPOSITE TECHNOLOGY Giant’s High Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. - RIDECONTROL ERGO 3 This updated control system features clean buttons that are integrated with the handlebar grips. You can install the three-button control on the left or right side, making it easy to switch power modes. You also have the option of adding a second control on the other side. Using the RideControl App, you can configure it to your own personal preferences. - RIDECONTROL GO Available on premium Giant E-Bikes, RideControl Go features a multipurpose button integrated into the top tube. Colored LEDs allow you to switch power modes from the top tube and keep a clean handlebar setup. The lights also display battery level and support mode. - ENERGYPAK Giant’s latest EnergyPak battery systems feature streamlined designs that are integrated with the E-bike for a sleek and modern profile. Giant E-bikes offer several different EnergyPak options including the EnergyPak Smart and EnergyPak. Each one is designed to optimize the E-bike experience for a specific style of riding. - SYNCDRIVE PRO MG This updated motor features a magnesium casing that reduces weight to just 2.5kg while still delivering 85Nm of torque and retaining the instant engagement that characterizes SyncDrive Pro motors. It’s also engineered for a reduced noise level and quiet performance. The motor shape and dimensions allow for a narrow Q factor to ensure a natural pedaling position with minimal strain on the knees.

ACCELERATE UP CLIMBS, FLOAT THROUGH ROCK GARDENS, EXPERIENCE MORE POWER, AGILITY AND CONTROL WITH THIS LIGHTWEIGHT, FULL-SUSPENSION E-MTB. A NEW ULTRA-SLIM BATTERY MINIMIZES WEIGHT SO YOU CAN RIDE TECHNICAL TRAILS THE WAY YOU ALWAYS DREAMED OF. KEY PERFORMANCE FACTORS Lighter weight New EnergyPak 400 battery is designed to be ultra slim. You get all the power but in a smaller package that’s cleanly integrated with the composite frameset. Advanced cockpit control RideControl Ergo 3 remote attaches to the all-new composite Giant Contact SLR integrated handlebar. The control can be mounted to either side of the handlebar so you can customize your controls for a clean, uncluttered cockpit. More power New SyncDrive Pro motor, co-developed with Yamaha, puts out a powerful 85Nm of torque and weighs just 2.7kg. The result is quicker acceleration and climbing capabilities on technical trails.

More Juice, No Excuse The Moterra packs massive power, range, and silky suspension, handling rugged terrain like a luxury off-roader. Built to go further—faster. Model Description Rugged, responsive, and ready for anything—Moterra 3 has everything needed to tackle big days on the trail. The 150mm travel SmartForm C1 Alloy frame, huge 800Wh battery, and Bosch’s most powerful CX motor make short work of long climbs. A 160mm RockShox Psylo Silver RC fork and Deluxe Select shock ensure a controlled, responsive ride, while Shimano CUES U6000 shifting and MT520 4-piston brakes provide reliability you can count on. Ready to roll with WTB/Shimano wheels, it’s a no-nonsense trail companion. What it's for Endless spins, uphill wins, and permanent grins on all kinds of trails, from the mild to the wild Highlights - A premium SmartForm C1 Alloy frame - light, stiff, and guaranteed for life - Bosch's most powerful system – Performance CX motor and 800Wh battery. Incredibly natural power delivery and huge range - RockShox’s workhorse all-mountain suspension – 160mm Psylo Silver RC fork and Deluxe Select air shock - Reliable WTB ST i30 rims, 30mm inner width, with Shimano hubs and Continental Kryptotal tires - Precise shifting from Shimano’s CUES U6000 LinkGlide 11-speed drivetrain - Shimano MT520 4-piston hydraulic disc brakes with 203mm rotors deliver strong, consistent braking power

More Juice, No Excuse The Moterra packs massive power, range, and silky suspension, handling rugged terrain like a luxury off-roader. Built to go further—faster. Model Description Moterra 4 strips things down to the essentials—reliable, rugged, and ready for anything. A SmartForm C1 Alloy frame with a RockShox Deluxe Select shock and rugged Suntour Zeron 36X fork deliver a ride that is balanced, planted and predictable. Bosch’s most powerful CX motor and big 600Wh battery deliver smooth, sustained power, with more than enough range to keep things interesting. A Shimano CUES U6000 drivetrain and Tektro Gemini SL 4-piston brakes handle the stops and shifts, making this an always-game partner for off-road exploration and all-day excursions. What it's for Endless spins, uphill wins, and permanent grins on all kinds of trails, from the mild to the wild Highlights - A premium SmartForm C1 Alloy frame - light, stiff, and guaranteed for life - Climb-crushing strength and natural feeling power delivery from Bosch's most powerful motor, the Performance CX - Interchangeable 600Wh battery provides an ideal balance of range and light weight - Smooth-riding SR Suntour Zeron 36-X Boost 160mm fork, and RockShox Deluxe Select air shock - Precise shifting from Shimano’s CUES U6000 LinkGlide 11-speed drivetrain - Strong, controllable braking from Tektro Gemini SL 4-piston hydraulic disc brakes with 203mm rotors

In It to Pin It Just call it the “sweet spot” – the best of both worlds. Big-bike power and ride time, with lightweight-bike agility and handling. In other words, exactly what e-mtb riders everywhere have been waiting for. Moterra SL might just be the most fun mountain bike we’ve ever made. Model Description With full-power thrills and lightweight agility, Moterra SL 1 is built to go faster, ride harder, and deliver the goods on all kinds of terrain. Our lightest, full-power eMTB chassis has 150mm of Proportional Response Tuned Suspension and FlexPivot chainstays to maximize traction without the weight. A custom tuned Shimano’s EP801 drive unit fires off 85Nm of torque the second your legs demand it, while the 601Wh battery delivers tons of range in a light package. Full Fox Factory suspension and rugged Reserve wheels track the terrain with unwavering grip, SRAM's XO AXS group cracks off crisp wireless shifts, and the mullet wheelset—29” up front, 27.5” in the back— balances party with precision. What it's for Fast, fluid, ridiculously fun trail riding on everything from the steep and techy to the fast and flowy. Highlights - Light and durable, full carbon, 150mm travel FlexPivot frame with Proportional Response suspension kinematics - Top-of-the-line Fox Factory suspension – 160mm Factory Float 36 fork & Factory Float X rear shock - SRAM’s penultimate e-MTB group, XO AXS wireless 12-speed shifting, with e*thirteen Plus cranks & Magura MT7 hydraulic disc brakes - Reserve's rugged 30 HD AL trail wheelset is built to take a beating and keep on leading - OneUp V3 dropper post & Hollowgram SAVE vibration-reducing carbon handlebar - Cannondale-tuned Shimano EP801 motor & custom, high-energy-density 601Wh internal battery

In It to Pin It Just call it the “sweet spot” – the best of both worlds. Big-bike power and ride time, with lightweight-bike agility and handling. In other words, exactly what e-mtb riders everywhere have been waiting for. Moterra SL might just be the most fun mountain bike we’ve ever made. Model Description The Moterra SL 2 moves with force, speed, and absolute intent. Built around our lightest, full-power eMTB chassis, it has 150mm of Proportional Response Tuned Suspension to keep the ride composed on the climbs and unshaken in the descents. FlexPivot chainstays absorb impact without stealing momentum. Shimano’s EP801 drive unit, tuned for instant response, fires off 85Nm of torque on command, while XT 12-speed shifts with predictable precision. Fox Float X Performance Elite suspension grips the terrain, keeping traction locked through every twist, drop, and landing. The Mullet Wheelset—29” up front, 27.5” in the back—delivers high-speed control with quick, agile handling. Magura MT5 four-piston brakes bite when the moment calls for it, and a custom 601Wh battery ensures the ride lasts longer than the daylight. What it's for Fast, fluid, ridiculously fun trail riding on everything from the steep and techy to the fast and flowy. Highlights - Light and durable, full carbon, 150mm travel FlexPivot frame with Proportional Response suspension kinematics - Premium Fox suspension - 160mm Performance Float 36 fork & Performance Elite Float X rear shock - Legendarily smooth shifting Shimano XT 12-speed w/ e*thirteen e*spec Plus cranks - Powerful, dependable Magura MT5 4-piston hydraulic disc brakes - Cannondale-tuned Shimano EP801 motor & custom, high-energy-density 601Wh internal battery - Rugged WB KOM Trail i30 rims with grippy Maxxis Minion DHF front and Dissector rear tires

Obsidian The Obsidian adopts a unique shock absorption design, so that you will no longer be affected by bumps, and you can easily control various road conditions. At the same time, its electric power-assist system allows you to easily climb steep climbing sections, making your travel more relaxed. 60-80 Miles Extended Range 400 Lbs Load Capacity 1000W Powerful Motor 48V 19.6Ah Samsung Cells Safety Certified In Accordance With UL 2271 Discover Design Advantages An e-bike that conquers all terrain and is never field controlled. Come and feel its charm. Polished Finish1000W MotorTorque SensorHydraulic SuspensionHidden Battery Polished Finish1000W MotorTorque SensorHydraulic SuspensionHidden Battery Polished Finish1000W MotorTorque SensorHydraulic SuspensionHidden Battery Explore Performance SAMSUNG Battery Tektro Hydraulic Brake Torque Sensors UL lab tested battery built with Samsung cells. Includes a BMS (Battery Management System)motherboard by TI to watch over the health status of each and every battery cell for a longer & safer ride. Engineered for electric bikes, these brakes provide consistent stopping power and heat dissipation. The dual-piston design ensures excellent modulation perfect for high-speed commutes or trail adventures Torque sensors provide a more natural and responsive riding experience with improved range. It measures the force applied to the rotating crank on how hard the rider is pedaling which also helps to save battery power by only outputting the assistance necessary based on the rider's effort. Key Features Smooth Gear Transitions Our 8-speed derailleur is engineered to provide effortless and seamless gear transitions. Say goodbye to chain drops and frustrating shifts – this derailleur ensures you're always in the right gear Advanced Impact Reduction: Our full suspension mountain bikes use DNM air shock absorbers, which are lightweight, of high quality, and offer superior functionality. They excel at absorbing impact forces and minimizing the impact on your body when traversing rough terrains, making them suitable for various harsh road surfaces. The AOY-36RC can reach a maximum air pressure of 270 psi Impact-free Ride Equipped with state-of-the-art damping and spring systems that absorb shocks and vibrations, delivering a smooth and controlled ride. Adjust &Fine-tune your suspension to match your riding style and terrain.

The Ultimate Off-Road Beast Himiway Cobra The Cobra adopts a strong high-end four-bar linkage suspension and coil suspension, absorbing any bumps on the way down the trail. The 26”X4.8” CST super fat tires and 750W gear hub motor, make riding more stable to suit all road conditions. 400lbs payload capacity 400lb. Payload Capacity Himiway Cobra payload capacity:330lbs 26*4.8 Super Fat Tire Tires 750W electric mountain bike geared hub motor 750W Geared Hub Motor the latest Samsung/LG Qauternary Battery 48V 20Ah Samsung/LG Battery Shimano 7 speed gear shift system Max 25 MPH With Pedal Assist 60 miles with pure charge and 80 miles with pedal assist 80 Miles Miles per Charge (estimate) The Ultimate Off-Road Beast True 4-bar linkage All-terrain versatility 26?x4.8? fat tires Ultra-Drive 750W motor Fat Tire Electric Bike Himiway Cruiser Display LightDark THE 750W ULTRA-DRIVE MOTOR Himiway’s high-end geared hub motor uses the latest updated inner ring, enabling high-temperature resistance and better heat dissipation and guarantees longer life expectancy. The geared hub provides massive amounts of torque when powering up steep hills or accelerating quickly from a dead stop. With 1000W of peak motor power, you can easily conquer the most rugged terrains. 750W Motor Power 86Nm Max Motor Torque All Terrain Fat Tire Electric Bike Himiway Escape at Night GO FULL THROTTLE WITH FULL SUSPENSION Himiway Cobra is the first e-bike on the U.S. market with four-bar linkage suspension technology,complemented with 4.8” CST fat tires, These specialize in absorbing both rear-upward force and vibrations, Which allows you to ride safely over rutted trails, deep snow, and soft sand without taxing the rider. FLEXIBLE HEIGHT&SUPER LOAD CAPACITY According to research, the average load capacity of other electric bicycles on the market is 275bs. Himiway uses high-quality upgraded 6061 aluminum for the frame to give the bike unparalleled durability. The Frame can handle more weight and pressure, and is especially friendly for those with taller and stronger figure. Half twist throtttle design THUMB THROTTLE The thumb throttle are designed for professional cycling enthusiast. Your both hands are more capable of keeping the balance of Himiway Cobra pro. professional mountain bike saddle:SR saddle SELLE ROYAL SADDLE The Selle Royal Saddle features a comfortable design specially made for pressure relief. 48V Himiway self R&D Luminosity Spotlight 48V LUMINOSITY TAILLIGHT The Himiway independent R&D luminosity taillight is 20% brighter than LED light. Visibility is improved to guarantee your safety while riding at night. Shimano 7 speed gear shift system SHIMANO 7 SPEED GEAR SHIFT SYSTEM The Shimano 7 speed gear shift system offers you more choice while riding in a variety of conditions. Along with the pedal-assist system, you can find the speed that suits your journey. Using this system accurately can increase the range of a single charge by up to 15%. Upgraded solid mountain bike aluminum frame FOUR-BAR LINKAGE SUSPENSION & COIL SUSPENSION The four-bar linkage represents a four-sided polygon: the chain stay, seat stay, rocker, and seat tube. Front fork: coil suspension FRONT FORK: COIL SUSPENSION The durable Himiway suspension fork has preloaded adjustments for the spring’s stiffness and a lock-out lever. With 80mm of available compression, it is the perfect fit for your chosen terrain. Tektro hydraulic disc brakes HYDRAULIC BRAKES Hydraulic brakes provide superior braking performance and durability. With proper maintenance, there won't be a decline in braking power for 5 years. Mountain bike durable aluminum crankset DURABLE ALUMINUM CRANKSET Durable aluminum crankset guards provide protection to the chainring and assists the chain-stay while traveling over rugged terrain. 26*4.8 inches CST puncture resistant tires 26"X4.8" CST ALL-TERRAIN FAT TIRES The 26 X4.8 Cheng SHIN all-terrain fat tires are the biggest fat tires in the U.S. e-bike market, providing upgraded grip and traction on rugged roads. Even in the most challenging terrains and weather conditions, these fat tires guarantee your safety and offer you an smooth and easy riding experience. Specification Battery 48V 20Ah Samsung/LG lithium battery Range 60–80 miles Hub Motor 750W brushless geared hub motor Total Payload Capacity 400 lb. Recommended Rider Heights 5'5? ~ 6'5? Charger US standard 3.0 A smart charger Controller 48V/22A Display LCD display with USB charging Weight 88 lb. Pedal Assist Intelligent 0~5 level pedal assist Components Tires 26? x 4.8? CST fat tires Brake lever Aluminum alloy comfort grip levers with motor cutoff switch Rear Light Battery-powered bike light Freewheel Shimano 7 speed gear shift system Brake Tektro 180mm hydraulic brakes Chain KMC chain Stem MA-400 28.6*90*31.8MM Crank 44T*170MM 4-jaw L/R forged alloy Gearing Shimano-

Full Suspension Mountain Ebike Latest Hithot H3 is a mid-drive electric bike with front and rear suspensions. It is an absolute model for mountain, trails, and street riding. All Terrain Electric Bike Featuring Kenda tires, step-over frame, and mid-drive motor, this all-terrain ebike is best for hitting the road, trails, mountain, and grassland, etc. Kenda 27.5" x 2.35'' Tires Thanks to the Kenda tires, whether tackling grass, hills, or rough trails, the H3 can handle them all with ease. 672Wh Samsung Cell Battery Powered by rechargeable and removable 672Wh battery. Ensuring a max range of 75 miles. 48V * 500W Mid-Drive Motor 500W mid-drive motor does better in climbing hills and offers higher torque to take you farther. Waterproof LCD Display Placed in the T-shaped area of the front part of the e-bike to better prevent damage from falling and helps you track the riding status. Tektro Hydraulic Disc Brakes Come with 180mm front and rear brake rotors, allowing to slow or stop quickly.